[phpBB Debug] PHP Warning: in file /includes/functions.php on line 4559: Invalid argument supplied for foreach()
Dampfradioforum • Thema anzeigen - grundig 1070

Dampfradioforum

Röhrenradioforum: Das Forum für alle Freunde alter Röhrenradios, Kofferradios und Röhrentechnik!
Aktuelle Zeit: Do Mär 28, 2024 23:51

Alle Zeiten sind UTC + 1 Stunde




Ein neues Thema erstellen Auf das Thema antworten  [ 22 Beiträge ]  Gehe zu Seite 1, 2  Nächste
Autor Nachricht
 Betreff des Beitrags: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 14:16 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
hi everyone
I have repair a grundig K2musiktruhe(same machine with 1070).I hope , you will help me. the radio now playing but not perfect.I have replaced all paper capacitor, but there are 280VDC on pin 9 in EABC80 tube.


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 14:25 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
Hi,

At first i'll place the Schematic:

https://nvhrbiblio.nl/schema/Grundig_1070.pdf

Pin 9 is the Anode of the Triode System and they should be around 70V

You should measure the Resistors R30 and R31, These two Resistors are conected to the Anode of the EABC80 and going to Aode Voltage. I think during the Change you have bridget them (Maybe soldered a capacitor to the wrong connector).
They should have a Resistance around 440k Ohms.

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 14:37 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
Hi,

At first i'll place the Schematic:

https://nvhrbiblio.nl/schema/Grundig_1070.pdf

Pin 9 is the Anode of the Triode System and they should be around 70V

You should measure the Resistors R30 and R31, These two Resistors are conected to the Anode of the EABC80 and going to Aode Voltage. I think during the Change you have bridget them (Maybe soldered a capacitor to the wrong connector).
They should have a Resistance around 440k Ohms.


hi,I measumend thats resistors and 220K resistance, just now


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 14:48 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
Both of them 220k?

To be honest, i'm not sure if the R30 is a 220K, because in the schematic stands 220A, but that could be a Print mistake. can you look which Value is printed on the Resistor?

Can you measure the Voltage directly behind the Rectifier and on Pin 9 of the EL84? At the Rectifier there should be 280V and on the G2 from the EL84 I think around 270V

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 14:56 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
Both of them 220k?

To be honest, i'm not sure if the R30 is a 220K, because in the schematic stands 220A, but that could be a Print mistake. can you look which Value is printed on the Resistor?

Can you measure the Voltage directly behind the Rectifier and on Pin 9 of the EL84? At the Rectifier there should be 280V and on the G2 from the EL84 I think around 270V


the rectifier(+) is 295VDC
EL84 pin 9 is 274VDC


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:01 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
That sounds ok

But that means, that the Resistors don't have Resistance, because you have the same Voltage at both sides of the Resistors . Pin 9 EL84 is on Anode Voltage like the Resistors to Pin 9 of EABC80.

Please measure the Resistance between this two Points (pin 9 EL to pin 9 EABC)

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:08 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
That sounds ok

But that means, that the Resistors don't have Resistance, because you have the same Voltage at both sides of the Resistors . Pin 9 EL84 is on Anode Voltage like the Resistors to Pin 9 of EABC80.

Please measure the Resistance between this two Points (pin 9 EL to pin 9 EABC)



0.46M ohm between pin9 EL84 to pin9 EABC80


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:13 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
Okay, that's weird…

Try to disconnect the Capacitor from Pin 9 EABC and measure the Voltage again, Maybe measure the Voltage of the Resistors.

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:21 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
Okay, that's weird…

Try to disconnect the Capacitor from Pin 9 EABC and measure the Voltage again, Maybe measure the Voltage of the Resistors.



is it 10 nano farad


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:31 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
Yes, just dissolder this capacitor and make sure it wont get Connection to enything else while the Radio is on. Then Measure the Voltage again.

I don't think this would be the Problem, but you never know. Often the Problems are just so simpel that you search Hours at the wrong Point.

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:39 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
Yes, just dissolder this capacitor and make sure it wont get Connection to enything else while the Radio is on. Then Measure the Voltage again.

I don't think this would be the Problem, but you never know. Often the Problems are just so simpel that you search Hours at the wrong Point.


I disconnected 10 nanof cap. and measuremend voltage on pin9 (eabc80) 265VDC


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:42 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
ok and there is Nothing else connected then the resistors?

can you measure the voltage from the other side of the resistors? This than this should be 274V like on pin 9 of he EL84

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:48 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
ok and there is Nothing else connected then the resistors?

can you measure the voltage from the other side of the resistors? This than this should be 274V like on pin 9 of he EL84


other side of resistors???


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:52 
Offline
Benutzeravatar

Registriert: Di Nov 12, 2013 20:58
Beiträge: 436
Wohnort: Mönchengladbach
Kenntnisstand: Elektrotechnischer Beruf/ Studium
Yeah, you have measured at the Pin9 of the EABC, there is 265V. Now pleas measure the Voltage at the other end of the resistors, there should be 274V

_________________
Wer sich nicht schonmal am Lötkolben verbrannt hat, der hat noch nie richtig gelötet.
Bild


Nach oben
 Profil  
Mit Zitat antworten  
 Betreff des Beitrags: Re: grundig 1070
BeitragVerfasst: Di Mär 24, 2020 15:55 
Offline

Registriert: Mi Sep 30, 2009 14:56
Beiträge: 118
Radio Martin hat geschrieben:
Yeah, you have measured at the Pin9 of the EABC, there is 265V. Now pleas measure the Voltage at the other end of the resistors, there should be 274V


it is 272VDC


Nach oben
 Profil  
Mit Zitat antworten  
Beiträge der letzten Zeit anzeigen:  Sortiere nach  
Ein neues Thema erstellen Auf das Thema antworten  [ 22 Beiträge ]  Gehe zu Seite 1, 2  Nächste

Alle Zeiten sind UTC + 1 Stunde


Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast


Sie dürfen keine neuen Themen in diesem Forum erstellen.
Sie dürfen keine Antworten zu Themen in diesem Forum erstellen.
Sie dürfen Ihre Beiträge in diesem Forum nicht ändern.
Sie dürfen Ihre Beiträge in diesem Forum nicht löschen.
Sie dürfen keine Dateianhänge in diesem Forum erstellen.

Suche nach:
Gehe zu:  
POWERED_BY
Deutsche Übersetzung durch phpBB.de

 
Impressum